This laboratory gives a basic idea of three modes of Heat Transfer and types of
flows which are essentials in modern Space craft, Thermal Engg, Automobile Engg.
& in Solar Energy utilization. It also helps a value based education, giving
sound technical and pratical knowledge. Inculcating, searching and Building the
reseach potential in the students and making them competent professionally and
globally.
Major Equipments:
Thermal Conductivity of Insulating powder
Natural Convection App.
Composite Wall App.
Forced Convection App.
Thermal Conductivity of metal Rod
Emissivity Measurement App.
Stefan Boltzman App.
Heat Pipe App.
Critical Heat Flux App.
Parallel Flow Counter Flow Heat Exchange
Lab Area:
99 Sq. m
Metallurgy
Lab Location :
Main Building
Lab Incharge :
Miss S. R. Shaikh
Establishment Year :
2009-10
Lab Assist. :
Kulkarni V. L.
It gives the knowledge of behavior of the different metals at different temperatures and forces which will be helpful in gaining the complete hands-on knowledge of various metal strengths.
Major Equipments:
Microscope RV3
Computer Interface Attachment
Metallurgical Inverted Microscope
Abrasive Cut Off Machine
Double Disk Polishing Machine
Muffle Furnace
Lab Area:
100 Sq. m
Refrigeration and Air Conditioning
Lab Location :
Main Building
Lab Incharge :
Prof. S.S. Basarkod
Establishment Year :
2009-10
Lab Assist. :
Kulkarni V. L.
Students can gain the in depth knowledge of working of refrigerators and air
conditioners which are part and partials of the every Office, Home and necessity
in Industries and in transportation.
Major Equipments:
Refrigeration Tutor
ICE Plant Tutor
Air Conditioning Tutor
Mechanical Heat Pump
Lab Area:
100 Sq. m
Experimental and stress Analysis
Lab Location :
Main Building
Lab Incharge :
Prof. V.V. Potdar
Establishment Year :
2009-10
Lab Assist. :
Patane Ravindra S.
A detailed analysis of the stress concentration and failure of the component can
be studied, which can be applied to various cyclic load fluctuating components
like Gear teeth, crankshaft, etc. which are complicated to model and analyze by
other experimental procedure. It helps for research scholars.
Major Equipments:
12 Research Polari Scope
Photo Elastic Material Sheet Casting Kit
Calculation of Gauge factor and strain for single arm
two arm four arm Bridge and lateral and axial strain
Lab Area:
100 Sq. m
Workshop
Lab Location :
Main Building
Lab Incharge :
Prof. R. R. Anyapanawar
Establishment Year :
2008-09
Lab Assist. :
G.V. Joshi
A separately housed workshop being subdivided into Fitting, Carpentry, Foundry, Welding and a well equipped Machine Shop with latest Machines which helps the students in gaining practical knowledge of manufacturing processes. This also helps in completion of the students projects at final year level.
Lab Area:
100 Sq. m
CAD/CAM
Lab Location :
Main Building
Lab Incharge :
Prof. R.M. Patil
Establishment Year :
2009-10 “ ”
Lab Assist. :
Patane Ravindra S.
A well equipped latest configuration PCs 30 in Nos having latest software in Modeling, Machining and Analysis which helps the students to upgrade their knowledge to compute in the fast moving towards globalization
Lab Area:
66 Sq. m
Theory of Machines
Lab Location :
Main Building
Lab Incharge :
Prof. S. K. Kusekar
Establishment Year :
2009-10
Lab Assist. :
Shaikh Nigar Masim
The working models established in this Laboratory like Balancing Machine,
Gyroscope, Governors, Cam Analysis Setup, Vibration Test Rig will give the
different kinematic and Dynamic behavior of the components which are applicable
in the Automobile, Aircraft and various machine components.
Major Equipments:
Universal Governor App Motorized with 4 Nos Attachments
PCam & Follower Equipment Motorized with 3 Types of Pairs
Motorized Gyroscope
Torsional Vibration Set-Up
Forced Vibrations Set-Up
Longitudinal & Lateral Vibration Set-Up
Spring Mass Damper Vibration Set-Up
Static & Dynamic Balancing of Rotating Masses
Lab Area:
100 Sq. m
Fluid Mechanics & Fluid Machines
Lab Location :
Main Building
Lab Incharge :
Prof. S.R. Ghavane
Establishment Year :
2009-10
Lab Assist. :
Kulkarni V. L.
These working models give the overall idea of the fluid properties and characteristics at various load and speed, which helps the students to gain the knowledge of theoretically studied into reality.
Applied Thermodynamics
Lab Location :
Main Building
Lab Incharge :
Prof. V S Jakukiro
Establishment Year :
2009-10
Lab Assist. :
Kulkarni V. L.
This laboratory gives a basic idea of Thermodynamics and the students will gain
practical knowledge of finding the thermal Properties by different techniques
which are essentials in Thermal Engg, Automobile Engg. etc. It also helps a
value based education, giving sound technical and pratical knowledge.
Inculcating, searching and Building the research potential in the students.
Major Equipments:
UCloud and pour point App.
Engler Viscometer
Saybolt Viscometer
Abel Flash Point App.
Redwood Viscometer
Grease Penetrometer & Dropping Point App.
Carbon Residue and Accessories
Bomb Calorimeter
Pensky Martens Flash Point tester Closed
Aniline Point & App.
Lab Area:
100 Sq. m
Manufacturing Process Lab
Lab Location :
Main Building
Lab Incharge :
Prof. S.S. Bandi
Establishment Year :
2009-10
Lab Assist. :
Kulkarni V. L
It gives the knowledge of behavior of the different metals at different conditions and forces which will be helpful in gaining the complete hands-on knowledge of various metal strengths & Manufacturing Processes.
Major Equipments:
Moisture Tester
Universal Strength machine (Mechanical and Digital)
Permeability Tester / Meter(Electric)
Lab Area:
120 Sq. m
I.C. Engine
Lab Location :
Main Building
Lab Incharge :
Prof. S.S. Basarkod
Establishment Year :
2009-10
Lab Assist. :
Kulkarni V. L.
This laboratory gives a basic idea of I.C. Engines and the students will gain
practical knowledge of finding the Properties & Performance of I.C. Engines for
different types of Engines which are essentials in Thermal Engg, Automobile
Engg. etc. It also helps a value based education, giving sound technical and
pratical knowledge. Inculcating, searching and Building the research potential
in the students.
Major Equipments:
Engine Test Set up (231H)
02. Comp. VCR Engine Test Set up(234)
Lab Area:
90 Sq. m
Drawing Hall
Lab Location :
Main Building
Lab Incharge :
Prof Javed Mujawar
Establishment Year :
2009-10
Lab Assist. :
Patane Ravindra S.
Well organized with necessary requirement of the basics in the form of charts of the drawing are oriented on the walls of the Drawing Hall which will be helpful for the students to get a glance always when they enter the Hall.
